Turning holder SCLCL 2020 K12 for external turning

Turning holder SCLCL 2020 K12 for external turning.

Suitable for inserts CC_ _12_ _.

- Method of clamping insert in to holder, with screw through insert

C - Shape of turning insert which can be clamped into holder (RHOMBIC 80°)

- Angle under which the insert is attached to the holder (95°) relative to the workpiece axis

C - Clearance angle of insert for this holder (7°)

L - Orientation of turnig tool is left

20 - Height of turning tool in  mm

20 - Width of turning tool in mm

- Length of turning tool is 125mm

12 - Insert size which can be clamped in to holder

Material: 

  • Hardened steel - 42-45 HRc

Compatible with inserts . . . CC_ _12_ _.