Lathe knife S32T-MDWNL15

Turning knife S32T-MDWNL15 for internal turning.

Suitable for turning inserts DN_ _15_ _ .

S - The holder is made of steel

32 - The diameter of the holder is 32mm

T - The length of the lathe holder is 300mm

M - Method of holding the turning insert with a screw through the turning insert and with a clamping clamp from above

D - The shape of the turning insert that is clamped on the holder (ROMB 55°)

W - Angle under which the turning insert is clamped in the holder (62.5°)

N - Free angle of the turning insert intended for this lathe holder (0°)

L - Lathe Chuck Orientation (Left)

15 - The tile size suitable for this holder in mm


  • Hardened steel 42-45 HRc

Compatible with tiles. . . DN_ _15_ _.