Lathe knife S25S-MWLNL08

Turning knife S25S-MWLNL08 for internal turning.

Suitable for turning inserts WN_ _08_ _.

S - The holder is made of steel

25 - The diameter of the holder is 25mm

S - The length of the lathe holder is 250mm

M - Method of holding the turning insert with a screw through the turning insert and with a clamping clamp from above

W - The shape of the turning insert that is clamped on the holder (TRIGON 80°)

L - Angle under which the turning insert is clamped in the holder (2X95°)

N - Free angle of the turning insert intended for this lathe holder (0°)

L - Lathe Chuck Orientation (Left)

08 - The tile size suitable for this holder in mm


  • Hardened steel 42-45 HRc

Compatible with tiles. . . WN_ _08_ _.