Turning holder MTENN 2020 K16 for external turning.
Turning holder MTENN 2020 K16 for external turning.
Suitable for turning inserts TN_ _16_ _.
M - Method of clamping insert in to holder, with a clamp from above, and with screw through insert
T - Shape of turning insert which can be clamped into holder (TRIANGULAR)
E - Angle under which the insert is attached to the holder (60°)
N - Clearance angle of insert for this holder (0°)
N - Orientation of turnig tool is neutral
20 – Height of turning tool in mm
20 – Width of turning tool in mm
K - Length of turning tool is 125mm
16 – Insert size which can be clamped in to holder
Material:
- Hardened steel - 42-45 HRc
Compatible with inserts . . . TN_ _16_ _.
