Turning holder MDPNN 2020 K15 for external turning

Turning holder MDPNN 2020 K15 for external turning.

Suitable for turning inserts DN_ _15_ _.

M - Method of clamping insert in to holder, with a clamp from above, and with screw through insert

D - Shape of turning insert which can be clamped into holder (RHOMBIC 55°)

P - Angle under which the insert is attached to the holder (62,5°)

N - Clearance angle of insert for this holder (0°)

N - Orientation of turnig tool is neutral

20 – Height of turning tool in  mm

20 – Width of turning tool in mm

K -  Length of turning tool is 125mm

15 – Insert size which can be clamped in to holder

Material: 

• Hardened steel - 42-45 HRc

Compatible with inserts . . . DN_ _15_ _.