Turning holder MDJNL 2525 M15 for external turning

Turning holder MDJNL 2525 M15 for external turning.

Suitable for turning inserts DN_ _15_ _.

- Method of clamping insert in to holder, with a clamp from above, and with screw through insert

D - Shape of turning insert which can be clamped into holder (RHOMBIC 55°)

- Angle under which the insert is attached to the holder (93°) relative to the workpiece axis

N – Clearance angle of insert for this holder (0°)

L – Orientation of turnig tool is left

25 – Height of turning tool in  mm

25 – Width of turning tool in mm

-  Length of turning tool is 150mm

15 – Insert size which can be clamped in to holder

Material: 

  • Hardened steel - 42-45 HRc
Compatible with inserts . . . DN_ _15_ _.